Step 4: Insert the coin batteries and close the box
Now you are ready to fold the box and insert the batteries.
Be sure that the flaps are between the led's leg and the upper part of the box, and the plastic (that acts like a switch) is between the leg and the batteries.
Close the box, and check if something's wrong, compare your box with the images.
Be sure that the batteries are at the same position as the photo (+-)(+-).
Be sure that the flaps are between the led's leg and the upper part of the box, and the plastic (that acts like a switch) is between the leg and the batteries.
Close the box, and check if something's wrong, compare your box with the images.
Be sure that the batteries are at the same position as the photo (+-)(+-).
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
