PetervG says: Jul 4, 2008. 11:25 AM
How would you use a ramp with a tiny board?
julesv in reply to PetervGJul 8, 2008. 2:07 AM
You drop in like on a real skateboard.
falman13 in reply to julesvJul 26, 2010. 7:03 AM
really? so that what you do with tech deck ramp skating?! Kind of boring isn't it? No offense
janpogi09 says: Jul 10, 2010. 6:29 AM
good one men
julesv says: Jul 4, 2008. 6:59 AM
Wicked. I've made this my snowboards in like 2 minutes and it works like a charm!
jj4942 in reply to julesvFeb 22, 2009. 8:36 PM
hey alot of people say im bad at tech decking = ( am i good or bad?check out this vid

seabananers in reply to jj4942Apr 15, 2010. 12:13 PM
not bad "clap clap"
al9595 in reply to jj4942Jan 16, 2010. 12:25 PM
ur not bad
blindskate in reply to jj4942Dec 22, 2009. 7:27 AM
Your not that bad but your tricks are very sketchy just practice
Xander da gr8 (author) in reply to jj4942Feb 22, 2009. 9:44 PM
I am a lot worse than you. I build the stuff, but I just cannot ride it well...
Acepilot42 says: Feb 16, 2010. 6:57 PM
what is a tech deck?
DELETED_trevyboy says: Oct 24, 2009. 7:12 PM
(removed by author or community request)
PAPAROACH in reply to DELETED_trevyboyDec 13, 2009. 8:50 AM

his way is cheaper dude

vdude45 says: Aug 10, 2009. 7:52 AM
dude i remember a while ago, i made a mega ramp from cardboard, it had a frame made from knex tho, that was hella.
jj4942 says: Feb 22, 2009. 8:37 PM
pm me if im good = )
auxentiu in reply to jj4942May 12, 2009. 1:45 AM
ok u r good .........how do u heelflip??its hard when i alredy know how to kickflip
auxentiu says: May 12, 2009. 1:42 AM
no offence bur ures needs a bit of improvement
brewtendo says: Apr 17, 2009. 4:38 PM
i made one before i saw this instructable out of plywood, and it was as long as my room (including landing ramp!), no offense, but mine was a t-rex compare to yours
anthony169 says: Mar 7, 2009. 6:32 PM
this thing is tight thnx
Xander da gr8 (author) in reply to anthony169Mar 8, 2009. 8:44 AM
no problem. Ideas for tech deck ramps are greatly appreciated!
anthony169 says: Mar 7, 2009. 7:09 PM
you are way better than me
pinz321 says: Feb 8, 2009. 2:55 PM
if you want an even better surface u should take the cereal box carboard and that is seriously smooth
Xander da gr8 (author) in reply to pinz321Feb 8, 2009. 3:08 PM
if you try to bend the cardboard from a cereal box it will just make a few huge creases. Also, it is too thin.
pinz321 in reply to Xander da gr8Feb 9, 2009. 2:03 PM
no i mean to use it as a surface...like on top of the normal cardboard and yes there will be some creases but a lot less than the normal cardboard
the_burrito_master says: Aug 3, 2008. 10:29 PM
a bit bumpy isn't it? it would make the skate board fly right off.
Xander da gr8 (author) in reply to the_burrito_masterAug 4, 2008. 12:40 PM
the tape covers all of the bumps and makes it much more flat.
imthatguy1125 in reply to Xander da gr8Dec 14, 2008. 9:33 AM
hot glue a piece of cardstock over the creases and it will be smoother and go much much faster
the_burrito_master in reply to Xander da gr8Aug 4, 2008. 1:21 PM
well I see some massive creases
Xander da gr8 (author) in reply to the_burrito_masterAug 4, 2008. 2:47 PM
That was the first time i did it. I have done it again since then. The problem with the first one is i put the tape on before i bent it so the tape took the shape of it. If you put the tape on after you bend it than there should not be any creases.
the_burrito_master in reply to Xander da gr8Aug 4, 2008. 6:39 PM
ok yeah I saw your other one and it looked fine.
the_burrito_master in reply to the_burrito_masterAug 4, 2008. 1:25 PM
good job though
AznPanda says: Jul 10, 2008. 6:15 PM
haha nice
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!