Introduction: Technology Wall Warming

Hello friends, I will tell you about the technology of insulation, and how I insulated the house with a foam plastic.

Step 1: Application of Glue on the Wall.

Picture of Application of Glue on the Wall.

Technology insulation with polystyrene is very simple. You can do everything yourself.

Step 2: Press the Foam Plate Against the Wall.

Picture of Press the Foam Plate Against the Wall.

After the wall and the foam are smeared with glue. It is necessary to gently press the plate of foam to the wall.

Step 3: Security

Picture of Security

For reliable safety, so that the foam does not fall off the wall, it is necessary additionally to fix it with special oak.

Step 4: Protection of Polystyrene, From the Sun.

Picture of Protection of Polystyrene, From the Sun.

To protect the foam from the sun, it must be plastered, along with the mesh.

Step 5: Primitive Home Warming Technology.

In such a simple way. Independently it is possible to warm the house.

See the full video on YouTube

Comments

bcihlar (author)2017-11-05

the city/village you live in doesn't require a permit &will allow this up all winter?

About This Instructable

386views

3favorites

License:

Bio: Hi, I'm shooting a video on YouTube. And the technology of creation is shared with you.
More by zdmvk:Technology of the Plaster Wall. (Without Experience)Potato Pancakes. Ukrainian Dish.How to Paint the Door?
Add instructable to: