Print PDF
Favorite
Email
Step 3Drill holes in metal bar and bend it
On both sides of the metal bar, drill two holes, about 4 centimeters (two inches) apart. The sled must fit in between both sides of the bar easily.
Then, bend the bar down, at about 2 centimeters (an inch) from the holes, towards the center. Now it has to form a nice U.
Then, bend the bar down, at about 2 centimeters (an inch) from the holes, towards the center. Now it has to form a nice U.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
