Ten Second Pillow

Step 2 Solder the bag

First, put down a layer of baking paper (wax paper) on the table. Next, put down the ziplock bag, and then place another sheet of baking paper on top of this. Now, turn on the soldering iron to warm it up for a few minutes. Don't let it get too hot, as it will burn through the paper and melt through the plastic. If the baking paper turn brown, the soldering iron is too hot.

To melt the zip-lock bag, simply drag the end of the soldering iron across the top of the baking paper, following the line drawn on the bag. Don't go too slowly, as this will melt and burn the bag. Also, don't go to fast or the zip-lock bag won't melt enough to form an air-tight seal.