Tennis Ball Headphones

Step 5 Last Step

This is the final step. In this step you have to attach the speakers to the hanger wire. I'm not quite sure the best way to do this step, but I'll show you what I did.
I didn't want the speakers to be permanently attached to the hanger wire, so I used string. I think in the future, however, I would like reattach the speakers using some other method (if you have suggestions I'd love to hear them).

So, I took four small pieces of string and hot glued them onto the tennis ball halves so that they fit over the wire. When finished they could slide just a little bit, thus making the speakers adjustable.

The sound quality of the finished product largely depends on the quality of the original speakers. Mine turned out to be a pretty nice pair of speakers.

Comments

[montjoel]

Or , make two holes ( top and bottom ) so that the coat hanger can be pushed through. Now , the configuration of the coat hanger might have to be changed , so that the speakers can slide up and down to be adjustable. Now, to hold the different positions ; the coat hanger can be bent ..... , or good quality tape can be rapped at different positions . Thanks for your efforts! Cool idea!

[h.calvin720]

 What if you zip tied them in before putting the fabric over the openings that way you could just cut the zip ties when you wanted to take them out? Just an idea.