Get sharp photos using a wall, fence, tree branch, door, car hood, bamboo pole, or a signpost.
Velcro, bungee or hang from a suction cup with the optional mounting holes.
Step 1: Mark and Cut
Wear good safety goggles. Blades can slip or snap.
Mark three tripod feet on the edge of the ball with a pen or pencil.
Each flat foot is about 3/4 inch (18mm) wide.
There should be about 2 inches (50mm) between the edges of the feet.
Cut arches between the feet to make the basic tripod shape. Arch size and shape are not important.
Cut a 3/4 inch hole in the top of the ball.
Optional step: cut a side slit in the top hole for more tilt.
Optional step: make bungee cord holes above each foot.
Scroll down below the photo and click the other pictures for this step.