Step 2: Cut the groove
The pearl is held within a groove by the tension of the metal. I based my measurements off the pearl which is about 6.5mm wide.
First I marked the pipe with marker. I followed that mark by scoring a line with a pipe cutter. Next I used a carbide bit to cut the initial groove. I expanded the groove with a round hobby file.
First I marked the pipe with marker. I followed that mark by scoring a line with a pipe cutter. Next I used a carbide bit to cut the initial groove. I expanded the groove with a round hobby file.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
