Introduction: How to Make a Bulb Light Up Without Wires - Tesla Coil

Picture of How to Make a Bulb Light Up Without Wires - Tesla Coil

A revolutionary product that can make any tubelight into an emergency light.

This is based on tesla coil where the bulbs seem to come on without any wires connecting them. The electricity is in the air

Step 1: Science Behind.

Picture of Science Behind.

Step 2: Things You Will Need.

Picture of Things You Will Need.

Step 3: Circuit Diagram.

Picture of Circuit Diagram.

Step 4: Procedure:

Picture of Procedure:

Step 5: Circuit Connection:

Picture of Circuit Connection:

Step 6: ART "The Emergency Light Saber"

Picture of ART "The Emergency Light Saber"

Step 7:


tytower (author)2017-02-08

So how long does the 9 volt battery last when hung on a tube?

D art of science (author)tytower2017-02-09

Firstly the copper coil gets too hot and the circuit should be used for a little while at a time.

our battery must have lasted only about 5 minutes in total.

About This Instructable




Bio: D Art of Science creates innovative products and presentations that are packaged as DIY/How it works videos with TV production standards.
More by D art of science:IOT Based Water Managment. Smart Switch and FlownomoPEDAL POWERED DRILLLava Lamp
Add instructable to: