Print PDF
Favorite
Email
Step 2Assembly
I normally try to eyeball just where components will be on the pc board, and place the Socket in what I feel is the best position for it. Everything else can be soldered into place in the order most convenient for each person.
One caution: When inserting the IC into the socket, care must be taken not to bend any of the pins or misalign them. It is easy to put a 555 into a socket, since there are only 4 pins to a side, but with a 14 pin IC, there are 7 on each side and it can be a little more tricky.
One caution: When inserting the IC into the socket, care must be taken not to bend any of the pins or misalign them. It is easy to put a 555 into a socket, since there are only 4 pins to a side, but with a 14 pin IC, there are 7 on each side and it can be a little more tricky.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
