Introduction: Tetris Gummy Candy

Picture of Tetris Gummy Candy

This instructable show you how to make gummy Candy in shape of Tetris !

Step 1: You Will Need...

Picture of You Will Need...

You need:

- A spoonbill

- A package of made gel candies

- A bowl

- A ice cube tray in the shape of piece Tetris (for the methode: http: // e-English-French/)

Step 2: Return Liquid Candies

Picture of Return Liquid Candies

Sort out candies by color and put in separate bowls.

Spend the bowl in microwave during 20 seconds in 750W.

No more, because otherwise the candy is going to make of big lounge !

At the exit, the candy is liquid, take the spoonbill to return the homogeneous color.

Overturn into the mould.

Make the same operations for the other candies, until as all the moulds are filled.

Step 3: Turning Out of Candies

Picture of Turning Out of Candies

Once filled moulds, to put in the refrigerator during 2 hours.

To turn out of the tin them, pinch a highly-rated and grow with your finger.

They will come loose by firing above then.

And here is!


Sydneysyd (author)2014-12-08

I cost really nothing

gummy = 0.80€

Ice cube tray = 2.50€

That all :)

kenshiy (author)2014-12-05

i need the money to do this ;_;

aleceatsfood (author)2011-03-15

great! but you just made me hungry...

Sydneysyd (author)aleceatsfood2011-10-31

lmfao !

knexinventions 49 (author)2011-10-30

i think about 1hour

Muniosi (author)2011-04-06

Do you know if I could put them in the freezer instead? If so, how long would they have to stay in the freezer?

Sydneysyd (author)Muniosi2011-04-06

I did'nt think that... Thx for ur advice :-)

About This Instructable




Bio: Here to share my ideas, my creations. I try to make instructables with to language : english and french _______________________________________ Ici pour partager mes idées, mes ... More »
More by Sydneysyd:Your Own Log Pan for Nothing ! / Votre Propre Moule À Buche Pour Rien ! Technique d'ouverture des huitres / Technique of opening of oysters3D Letters in Papercraft (Easy to make)
Add instructable to: