Print PDF
Favorite
Email
Step 6Epoxy and bolt the bottom rails
Now we just need to attach the bottom rails. Unlike the top rails which were just epoxied to the underside of the top surface, here we are going to drill through the bottom surface and bolt rails to both sides. And epoxy for good measure.
When you are drilling through, you will feel how there isn't anything except paper in the core of the surfaces. Try not to let the drill wander, so your bolt will be approximately perpendicular to the surfaces and so the holes in your rails will line up.
When you are drilling through, you will feel how there isn't anything except paper in the core of the surfaces. Try not to let the drill wander, so your bolt will be approximately perpendicular to the surfaces and so the holes in your rails will line up.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
