Print PDF
Favorite
Email
Step 4Make the riser
We will now, over the next few steps, build the riser -the section that slides up and down to adjust the height of the stand.
You should have a few feet of pipe leftover. I recommend using about 4 feet of pipe for the riser. Using the saw again, trim this pipe down to four feet.
Then, take the piece of pipe you just cut and press it down into the base.
You should have a few feet of pipe leftover. I recommend using about 4 feet of pipe for the riser. Using the saw again, trim this pipe down to four feet.
Then, take the piece of pipe you just cut and press it down into the base.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
