With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I drew inspiration from the sweet custom Mag builds made by members of CandlePowerForums.com and BudgetLightForum.com. Some of the lights they build ...
We decided his brother would appreciate an XM-L with 3000K correlated color temperature. It closely mimics the light from halogen car headlights. It...
Well, clearly you'll need a little more than just your Maglite. But first, a few words on how you'll be powering this monster. This is important! H...
These all end up in the final product! 1.) The LED 2.) An 8xAMC7135 linear regulator driver 3.) The heatsink 4.) Arctic Alumina thermal epoxy Opt...
To access the switch, remove the rubber boot covering the, well, switch. You'll need a 5/64" or 2mm hex wrench to remove the switch from the body. ...
Now that the switch is cut down, you need to solder a positive lead to the center of the switch, and a negative lead to the slender piece of steel wel...
This final product is taking shape...just a couple of things left to do! Check back for the complete Instructable in a little bit...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »