Introduction: The $1.99 Noodley Beverage Boat

THIS INSTRUCTABLE WILL BE FEATURED ON THE RACHAEL RAY SHOW

(Backyard DIY) July 4th 2017!!!

[Note from Jonathan, This is the ORIGINAL FOLKS, I have seen HUNDREDS or copycats now!]

Living in Las Vegas, and spending so much time in the pool has taught me, you need to keep drinking, to stay hydrated, and the liquid should be cool.

(Notice I am not saying *WHAT* Liquid)

Having a cooler full of ice, and liquid is fine, But It needs to sit BY the Pool,
so to get a drink I have to leave the pool, trek over hot decking, get my drink, head back into the pool, set my drink on the hot deck, while I am in the water, or swim with my drink.

Now I have seen some of the floaty drink holders in the Pool stores $34.00 holds 4 drinks .. BAH!

I don't understand why there is no "floating ice chest" that holds 10-15 can's or bottles with enough ice to keep them cold for a few hours..

Well, THIS IS INSTRUCTABLES ... SO ... I PRESENT ...

The $1.99 Noodley Beverage Boat


Seeking inspiration, I went to the Local .99 cent store, and bought a pool noodle (basically its a kinda fibrous floating material) a medium sized plastic storage container (with a locking lid) and some waterproof nylon rope.

Cut the Noodle into 4 pieces (Two Long, and two shorter) Used the rope to tie them all together, and wrapped the noodle and rope around the lid of the plastic container.

Took my project to the pool, for first test; filled the container with water, placed it in the pool, then jumped it and tried to capsize it.
(with no success) then drained out the water, added Ice, and cold sodas and beer, placed back in the pool ...

[Editors note, I "TOFTT" here, to make sure that the beverages stayed cold, and did not spill, no matter how many I drank, It was a hazardous and dangerous risk, not only to myself, but to my bladder]

Comments

author
rfakhre (author)2012-08-18

does instructables have an award show? This year's winner for Simplest Instructable goes to THIS ONE. or The Under 5 dollar category winner is, etc...

author
daithiking (author)2012-08-13

This is why I use this site.

author
MartiniGirlChar (author)2015-12-18

What are the dimensions of the storage container?

author
davidbarcomb (author)2014-11-27

Simple yet very useful. Thank you

author
patatarium (author)2014-06-23

Is really cool good job

author
Mike63 made it! (author)2014-06-15

Made It! I didn't cut the noodle all the way through. I just cut it enough so part of it would act like a hinge. I also wrapped the rope around the container once before stringing it through the noodle. At each hinge point I also wrapped the rope that went through the noodle around the first wrapping of rope.

FloatingCooler.jpg
author
macgeek (author)Mike632014-06-15

Awesome Mike!!!

Jonathan

author
tonysoprano6379 (author)2014-05-27

Well Done! Simple, Creative and fills a need for much less than the "pool stores" have to offer. EPIC INSTRUCTABLE!

author
Toffy (author)2013-08-08

AWESOME........totally great idea.

author
petrien (author)2013-07-14

Now hack off the bottom of a couple of remote control boats and screw them onto the bottom to make a remote controlled drink boat! (Don't know how much it could hold though, as the motors can't be that strong)

author
chico_swizz (author)2013-06-10

Good idea for pool parties

author
supreme creator (author)2013-03-31

now you can relax in the pool and have a drink near by wonderful idea macgeek


author
BuckNasty (author)2012-12-01

awesome instructable!

author
Judith756 (author)2012-09-24

So simple and yet I would never have thought of it. Great build.
Thanks!!

author
Penolopy Bulnick (author)2012-09-20

That's so simple but oh so very, very handy! I don't know how you thought of it, but I'm glad you did :D

author
macgeek (author)Penolopy Bulnick2012-09-20

They say "necessity is the mother of invention", Personally I always thought it was "laziness is the mother of invention" -- Either way, I am glad you liked it!!

:)

Jonathan

author
hallsan (author)2012-09-20

Sweet!! handy for those pool parties. Now can we put a cover on it to shade the drinks from the sun?

author
thirteenthmuse (author)2012-09-18

Just thought you should know that your photo is being used here on this auction : http://www.listia.com/auction/5973068-diy-floating-cooler. Most likely your tutorial is being auctioned off as well.

author
macgeek (author)thirteenthmuse2012-09-18

thanks, it takes 'chutzpa' to take someone Else's idea and say its your own, but it takes balls to "sell it"

Jonathan

author
Les Créateliers (author)2012-08-30

So awesome! I posted it on my website, here's the link:
http://www.lescreateliers.com/Les_Createliers/Idees_Ideas/Entries/2012/8/30_Bateau_a_beuvragesBeverage_boat.html
Cheers!
Marie-Eve

author
Datawolf (author)2012-08-09

Cold drinks in warm water ? :-/

author
macgeek (author)Datawolf2012-08-09

YES!
cold drinks, that STAY COLD, in warm water!!

Jonathan

author
BarginsTech (author)macgeek2012-08-24

Scienced! I mean thats what ice is for anyway! :P

author
tamicarr (author)2012-08-13

I bet you could use this fabulous invention as a handy tote for kids pool toys, suntan lotion, etc .... Great site with great ideas and easy instructions ... thanks!

author
ajohnson-4 (author)2012-08-12

OMG this is AWESOME!!! I'll be making this for the friends who own the 2 pools I spend loads of time in. THANKS!!!!! No more warm beer for us sitting on the side of the pool!!!

author
AmyLuthien (author)2012-08-12

This is completely and totally AWESOME!!

author
LakeLivin (author)2012-08-12

"wrapped the noodle and rope around the lid of the plastic container."
Was this just 'loose fit' or did you tie it somehow?

Now it just needs an awning or umbrella of some type added to keep the direct sun off of the ice and drinks. Gotta believe that would significantly reduce ice meltage time.

Oh, and I'm calling shenanigans on your project costing $1.99 lol. At my dollar store, the noodle, box, and rope is going to add up to $3.00 :- ).

author
macgeek (author)LakeLivin2012-08-12

I am *SO* busted!

Yes, there was tax on that, but calling it
"The $2.04 Noodley Beverage Boat" just didn't roll off the tongue!

:)

Jonathan

author
Matz (author)2012-08-12

I know what I'm making before summer's over!

author
chrwei (author)2012-08-08

an improvement suggestion:
use 2 containers, one inside the other like they stack them in the store. Add some thin foam sheeting, like things come packed in, between the 2 containers as insulation. hotglue or waterproof caulk the containers together. should keep the ice around a lot longer.

author
erwin (author)chrwei2012-08-12

I like your idea. Great improvement!
EG

author
askjerry (author)2012-08-12

I got as far as seeing the picture in the email and thought to myself:

BRILLIANT!

author
INFunGuy (author)2012-08-12

Dang!!!!! This is absolutely BRILLIANT!!!!!!!

author
AussieAnglerGal (author)2012-08-11

during summer is spend a LOT of time in our river and carrying a can of cola around it just not an option of someone who swims underwater a lot.....
one of our friends has long requested a floating drinks boat in the river....
so next summer i'll make this! (its winter at the moment! LOL)

author
AussieAnglerGal (author)2012-08-11

during summer is spend a LOT of time in our river and carrying a can of cola around it just not an option of someone who swims underwater a lot.....
one of our friends has long requested a floating drinks boat in the river....
so next summer i'll make this! (its winter at the moment! LOL)

author
Treasure Tabby (author)2012-08-08

Ooo great idea. I can also use this for my water lettuces to keep them in one place on the pond only I have to cut a hole at the bottom of the plastic box.

Thanks a bunch. :D

author
jimmytvf (author)2012-08-08

so damn clever! awesome!

author
jimmytvf (author)jimmytvf2012-08-08

put the lid and some tin foil, ice, and the lid, and you got a pool fridge thingy :D

author
ilpug (author)2012-08-07

Get a foot or two of 3 inch PVC pipe at the lumberyard, cut it into 3 inch sections, screw a few screw around one end of each section, then attach them to the NBB somehow, maybe zip ties. Cup Holders!

author
thejanitor (author)ilpug2012-08-08

you could try this for the cup holders https://www.instructables.com/id/Pvc-Cup-Holder-1/

author
macgeek (author)thejanitor2012-08-08

Sweet!!!

I may try and integrate this instructable into mine.

:)

Jonathan

author
starweaver (author)ilpug2012-08-07

You could so glue something like that down into the container with like gorilla glue or something!

author
ilpug (author)starweaver2012-08-07

Or that. However it gets them, this bad boy needs cup holders!

author
Carleyy (author)2012-08-08

This is such an awesome idea! So simple!

author
inquisitive (author)2012-08-07

like a beverage pontoon :) I bet you could do a little cooler with a weight on the bottom to keep it upright too

author
ilpug (author)2012-08-07

Well then, isn't that just genius....

author
jessyratfink (author)2012-08-07

That is just genius! Love it love it love it!

About This Instructable

192,419views

284favorites

License:

More by macgeek:Alexa  (voice) Controlled RF RemoteZombie Finger Food PropOOey Gooey Puke Worthy Zombie Shoes
Add instructable to: