Print PDF
Favorite
Email
Step 10Cut Out the Patterns
So, just follow the outer most edge of all the patterns and cut them out. For the metal, a pair of strong snips will be needed, as any metal thin enough to be cut with scissors won't be thick enough for this project.
Be sure to cut out the centers from the pieces and cut the 45 degree lines where the overlaps meet on the corners.
Be sure to cut out the centers from the pieces and cut the 45 degree lines where the overlaps meet on the corners.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
