Introduction: The Android and Nintendo DSi Charger

how to make a usb charger

Step 1: First You Need the Right Thing to Find or Buy

  • DSi/DS lite charger from gamestop
  • A phone charger(example like apple, samsung, and others chargers)
  • Wire cutters or sissors
  • Wire stripers
  • Wire tape

Step 2: Strip the Wires

strip the wires about half a inch and it should look like this

Step 3: Connect the Wires

connect the red wire to the red wire and connect the white wire to the black wire.

Step 4: Get Your Wire Tape

tape the wires and then test your device, it will work

Step 5: Now It's Charging

the usb charger works! :D

Comments

author
techboy411 made it! (author)2016-03-28

Nice use of that "DS" side of that charger. Now, hack a USB charging cord with both the DSi (in my case 3DS with an aftermarket battery) plug and the "DS Lite" plug and boom, portable charging. (With a suitable USB port. There not all made equal.)

author
seamster made it! (author)2014-08-14

Thanks for sharing your project!

author
JimmyK1 made it! (author)JimmyK12014-08-14

you're welcome

About This Instructable

1,653views

4favorites

License:

More by JimmyK1:The ds lite usb chargerThe Android and nintendo DSi charger
Add instructable to: