Step 19: Connect the protoboard to the Arduino.
Connect the short jumper wires on the Protoboard to the long leads in the enclosure. Solder the remaining wires to the ground rail, and 5V rail on the Protoboard, respectively.
Snap the Protoboard into place on top of the Arduiono.
Plug it in, seal it up, and you're ready to jam!
Snap the Protoboard into place on top of the Arduiono.
Plug it in, seal it up, and you're ready to jam!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
