Print PDF
Favorite
Email
Step 3Soldering of the resistors
You have 2 resistors with different values, so you will have to take care with them.
Let's start with the resistor R1 - 10k (brown / black / orange / gold). Bend it over with a pair of needle-nose pliers like the picture below and put it in the R1 rectangle. Solder it in place, and snip off the excess lead underneath
Do the same thing with the R2 - 470 ohm (yellow / purple / brown / gold).
Let's start with the resistor R1 - 10k (brown / black / orange / gold). Bend it over with a pair of needle-nose pliers like the picture below and put it in the R1 rectangle. Solder it in place, and snip off the excess lead underneath
Do the same thing with the R2 - 470 ohm (yellow / purple / brown / gold).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
