Step 2: Hacking the cheap eBay LCD to give FMark

There is not very much too this step at all, but it is fairly tricky. Mainly due to the 0402 sized resistor.

An 0402 resistor is 40 thousandth of an inch by 20 thousandth of an inch. That is 1mm x 0.5mm in metric. Anyway all you have to do in this step is get the suitable LCD from eBay and solder in a 1K0 resistor in the location called R3 as shown in the photo.

<p>Damn! I want one of those. And the belt</p>
Seriously sickened by the main photo &amp; the fact that Instructables have left it as-is. Yet we wonder why more women don't get into anything technologically related. Because they're still viewed/treated like this in the workplace. Pardon me while I go projectile puke.
Thank you for the feedback.<br><br>I'll pass onto my partner that you enjoyed the photo her and I took as click bait. She is also a member here and has published quite a few insructables.<br><br>Maybe after you have published and done something useful for the community in general we might take what you have to say seriously.<br><br>Though if what you have to say in future is going to be moaning about two people that have been in a relationship for more than a decade in a G-Rated photo, we probably still wont take you seriously.
My mistake, I apologize. I didn't see the fine print, which reads 'To new members of Instructables: if you haven't published anything, keep your mouth shut because your opinion on this public forum means nothing otherwise. Our community doesn't take such members seriously under any circumstances'. Click-baiting using photos such as this obviously takes far more talent or imagination than I possess.
Love the pic had to check u out
Sooo. As I am far too lazy to read all the previous comments, did you pull some ass? With the assistance of this dodad. You really wouldn't need much more than a pulse, with your broad range of stated options. But a feller can tell if something is helping. I can't really see it working on chicks. Who wouldn't behave similarly if shown any belt buckle whatsoever. Twinks, will likely have an explosive few moments awkwardly fiddling with it. Then wander off looking for something that will get less old on them. As far as bears are concerned, I suspect that no bear would listen to you for more than a few seconds. I mean, just look at all those twinks milling around, still frustrated by your old persons game. Ripe for the picking, by any bear. Especially, if they have no belt buckle to trigger little twink's memory of that traumatic experience. If you do find a chick, who gets in the mood, from this contraption. I bet she would have the number of both a twink and bear, who would love to come over so you 4 can play crisco twister and hide the weiner. Best of luck.
That picture though
Yeah first pic looks so awkward bro
My life is now complete. That first picture has shown me the way to a happy life <br>
Just made my day
that first picture looks so wrong
I agree with you there!!!
Very cool idea and huge props on the instructions! Its hard to find a fun project that I can understand ;)
Guys, <br> <br>heaps of people have asked me to make them one. It's not really my thing but I have set up the worlds most piss weak Indiegogo campaign <br> <br>http://www.indiegogo.com/projects/the-game-n-belt <br> <br>If it makes it cool. If it doesn't make it that, just gives me more spare time drink rum and work on my next instructable <br> <br>&quot;The RAIB&quot;
I assume the PCB was entirely homebrew? Care to share your through-hole and tin plating methods? I notice you plate after you drill and etch (According to your steps), I am very interested you see you plating process, that board looks fantastic!
Yes - the PCB was entirely homebrew and specifically made with simple methods. <br> <br>I DO have fancy methods for plating through holes and doing multi layer boards, but I spent hours laying out the board to make it easy for other people to make at home with just double sided PCBs. <br> <br>The &quot;through holes&quot; in the board in the photo are &quot;wire vias&quot;. Just Kynar wire wrap wire poked through the hole and soldered. <br> <br>The tin plating is just the normal powdery chemical stuff you buy online. &quot;Tin-it&quot; is one brand name.
I love this... And because I'm in the same contest, I hate you... <br> <br>I'm so confused:) <br> <br>Great Instructable, PERFECT photo and good luck in the contest.
I love this... And because I'm in the same contest, I hate you... <br> <br>I'm so confused:) <br> <br>Great Instructable, PERFECT photo and good luck in the contest.
regardless of your views on the main pic...It worked lol. This instructable came out on the 29th of April, and on the 3rd of May it's got over 60,000 views! Some instructables don't rack that many views in 2 years. <br> <br>Sex sells...that concept is universal, but I did think the idea was cunning... :P <br>
would this help me pick up chicks at a bar?
Probably not if the author is right : &quot; No one is going to notice anything else after they see the LCD goodness in the belt buckle&quot; <br>Which is why I find this game useless !!!&hellip; LOL
At the right bar, yes. <br>
Miss OrganGrinder, <br> <br>You wouldn't happen to know where these &quot;right bars&quot; are? As I have not had any success at all so far. <br> <br>BTW I do not like the green and black dress you are wearing in the lead photo. The feel of that synthetic material gives me the creeps.
Most of my dresses are made from that material...you'll just have to have the creeps. <br>
Don't you get worried about poking someone in the eye and getting sued?
This article is fantastic. Fantastic preview image to get viewers, fantastic rebuttal to those easily irritated, and fantastic optimization of hardware resources. <br> <br>You have my vote. <br> <br>=]
I agree!! This is awesome!!here is a thought.. what if you could take the same game belt buckle where it detached from the buckle to play and then slides back on.. I have a lighter belt buckle that does that.. the lighter slips out and then black in when done. now THAT would be a hot seller!! :) Best wishes!!
Annie, <br> <br>If I had more resources I would certainly love it to be detachable. Kind of like &quot;King Missile&quot;. <br> <br>It would make it easy for the wearer to play as well as for their friends to play. <br> <br>Thanks for the input.
gosh I am trying to think of where a resource would be other than my belt buckle I have. Let me hunt around and I will post the URL I come up with for you. :) I hope you do this!! I love to see people create such fun things and hey, a little money off of it wouldn't hurt either ;)
A removable buckle could be managed pretty cheaply and easily - you could just have one of those buckles that presses down to grip the belt (often used with webbing belts) and hold the game on top with rare-earth magnets. They would be strong enough to take everyday use but the game would just snap on and off.
had another thought.. you could even use a clip style buckle.. like those that cell phones snap into ( clip ) snap the game box out and back in when done. lol.. this is just way too cool!!
ok found a URL that is the same exact removable lighter belt buckle I have http://www.thesixthspace.com/classic-pattern-removable-lighter-plum-men-belt-buckle.html I hope this helps you.. or you can just go off this concept I guess. :)
would it not be easier to make a brass casing to put the guts of a Game Boy Micro in?
It would also be easier to never climb that mountain wouldn't it ?
if you are referring to my user name, i have never climbed a mountain in the traditional sense, but i live in the Appalachian mountain range (West Virginia to be exact) i was born here, raised here, and I'll more than likely die here, therefor, i am a mountaineer. Anyway, now that my rant is over I'll be serious, wouldn't it be awesome to be able to easily play Super Mario World or Metroid Fusion on a belt buckle?
Mr Mountaineer, <br> <br>When I first wrote that I didn't actually see your user name. I was actually making reference to the old one &quot;Why do people climb mountains? Because they can&quot; <br> <br>I did see your name BEFORE I hit post and had a little chuckle to myself though :) <br> <br>As far as playing Metroid Fusion or what ever else. I don't know. I get my fun from writing games not playing them and I don't even know what Metroid Fusion is. <br> <br>If you would like to put a Game Boy Micro inside a brass-case/belt-buckle for playing that game, I can lend a hand though.
sorry about the rant, i didn't mean anything by it. and yea i wouldn't mind doing it, but funds are very limited for me so it will have to wait. i only thought of this because making a brass case is probably the only thing i could do. i do know my way around a soldering iron, but that's about as far as my electronics knowledge goes.
The promo picture baffles me. The project itself has enough merit and thoroughness to be successful, yet your project doesn't even appear in the promo photo. Instead you've placed a sexually suggestive one? That's a little sleazy to me.
I have to admit that the display picture made me laugh. <br>Crazy how many views you've gotten since original posting date. Probably since the display picture ;P Haha. <br> <br>Well done. I like your instructable!
Mr Sniper, <br> <br>I would like to think it is the shear awesomeness of The Asteroid Belt that is getting the views. I am sure the lead pic is not hurting though.
* Belt Sifu
Hilarious! <br>You're a true BS*- Artisan mate ;)
OH MAN what a great write-up! I know the pic is going to irritate some people but I think if people keep reading, the pic kind of mirrors the amusing tone of the text which is worth a read even if you are not going to make the project. Thanks for a laugh!
Can I just say <br> <br>Thank you thank you thank you. <br> <br>Although I have a wonderful partner and she is much more than a short fat ugly man as myself deserves. It does sadden me that she constantly tells me I am not funny and I should also stop singing all the time. <br> <br>Much more encouragement like this and I might just be convinced to try out for Australian Idol next year.
Fat? You don't look fat in the pic! <br>Unless it's someone else with the missus...
go for it! i'll watch for sure if i can get in in canada... :-)
The pic is advertising genius! And funny.
Sounds awesome!.....not to sure about the ibles thumbnail/first pic though.
Some of these comments fail to meet the constraints of the "be nice" policy. Positive, constructive, or don't say anything at all. If people want to call out a project for being inappropriate, Instructables has a special flag button next door the favorite button in the upper right-hand corner of the page. (It looks like a flag.) <br /> <br />Excellent write-up. Your writing far exceeds the quality of that lead image. It's poorly lit and could use some color correction.

About This Instructable


356 favorites


Bio: Just a guy really. Like building stuff and like to help other people build stuff too. If you really need to know, am male in ... More »
More by cunning_fellow: The Asteroid Belt My response to the WS2811 with an AVR thing The Etchinator - low cost PCB spray etcher (under $100)
Add instructable to: