The Beverage Barge MK 2

Step 2 Cutting The Huggy Thingy

This is the first part of the two part beverage barge

First mark a spot on the noodle using the can. There should be about a two inch overlap with the can and the noodle (see picture one or two).
Cut on the mark. (see picture three)

Next trace the can around the center of the noodle with the permanent marker (see picture four)

Now hollow out the center with the knife, this is hard not to cut thru the sides ( see pictures five thru seven)

Fit the can in the hole you've just made (see picture one)