The Beverage Barge MK 2

Step 3 Cutting the Second Part

The bottom part of the beverage barge, the actual barge part

Measure out and mark about two can lengths on the noodle (see picture two)

Now cut on the line

Now cut the length that you just cut in half (see picture three)

Next Lay out the two peices you just cut side by side. (see picture one)

Now put the huggy part in the middle of the two noodles and trace around it. (see pictures four and five)

Cut the hole out that you just drew and put the huggie in it to make sure it fits, then take it out (see picture six)