Print PDF
Favorite
Email
Step 7Cut ricrack and pierce edges for sewing
Cut two pieces from your rickrack, each approximately 1/2" shorter that the height of the cut-down folder. It is best to make your cuts either at a crest or a valley in the wave of the rickrack.
Close your folder and lay the rickrack atop the edges. Using a needle or an awl, pierce through the center of rickrack and through both edges of the plastic folder at each crest and each valley in the rickrack. This may be easier if you pin down both ends of the rickrack.
Close your folder and lay the rickrack atop the edges. Using a needle or an awl, pierce through the center of rickrack and through both edges of the plastic folder at each crest and each valley in the rickrack. This may be easier if you pin down both ends of the rickrack.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
