Introduction: The Bubble Maker

Picture of The Bubble Maker

This bubble blowing blaster can make 7-20 bubbles per second. Note that the bubbles don't float. Though you can pick them up and throw them around.

Step 1: Materials

Picture of Materials

For this project you'll need:

1 Pizza Hut Bread-stick Sauce box,
1 bendy-straw (any color),
masking tape (optional)
sharpie (also optional),
plastic cup,(not pictured)
water and soap.(not pictured)

Tools:

1. scissors

Step 2: Put a Hole in the Box

Picture of Put a Hole in the Box

Using the scissors, cut a small hole (enough for the straw to fit in) on the top of the box.

Step 3: Cut Out the Bottom

Picture of Cut Out the Bottom

Cut out the bottom of the box and trim the excess off.

Step 4: Insert the Straw

Picture of Insert the Straw

Insert the straw into the hole punched out in step 2.

Step 5: Draw and Stick Face

Picture of Draw and Stick Face

Draw a face with the sharpie on a piece of masking tape and stick it on the cup.

Step 6: Make Bubble Fuel

Picture of Make Bubble Fuel

Make the fuel for the bubble maker by mixing equal amounts of soap and water.I have not tried real bubble soap.If you get a chance to try it, please let me know if it does work.

Step 7: Your Done!

Picture of Your Done!

Pour the bubble fuel into the bottom and blow into the straw.You'll get an amazing bubble experience!

Comments

About This Instructable

2,463views

10favorites

License:

More by PaperAirplaneandThings:How to use a Matrix Keypad with ArdunioCompressed Air Rocket Launcher!The Bubble Maker
Add instructable to: