The Corkscrew | a K'nex Ball Machine Lift

535

4

34

Published

Introduction: The Corkscrew | a K'nex Ball Machine Lift

About: Hey there! as my name kind of suggests, I'm Linkin_J! A 14 year old K'nex and fallout enthusiast! I highly advise you check out my 'ibles if you like either of them, or are just interested!

Hello! I'm back with another K'nex creation, this time it's a lift! It was featured in 3XODUS and was the second lift. It has taken me so long to get round to doing this because I have had to neaten it up and make it work reliably. (And procrastination got in the way a bit...) Anyway, you want to build it? Well, let's go!

Step 1: Piece Count

Rods: 177

Green - 85 (May be off slightly)

White - 17

Blue - 27

Yellow - 7

Red - 30

Grey - 11

Connectors: 150

1 Slot - 12

2 Slot (Orange) - 3

3 Slot - 24

4 Slot - 11

5 Slot - 35

8 Slot - 21

7 Slot 3D - 23

4 Slot 3D - 21

Miscellaneous: 43

Metallic Blue Clip - 14

Tan Clip - 1

Blue Spacer - 4

Grey Spacer - 23

Motor (Remote controlled small motor) - 1

Total - 370 Pieces

Step 2: The Frame

  1. Overview
  2. Build this
  3. Build this
  4. Assemble
  5. Alternate view

Step 3: The Exit

  1. Overview
  2. Build this
  3. Build these
  4. Assemble
  5. Build this
  6. Assemble
  7. Build this
  8. Assemble
  9. Assemble
  10. Assemble
  11. Assemble

Step 4: The Entrance

  1. Overview
  2. Build this
  3. Build this
  4. Assemble
  5. Assemble
  6. Assemble

Step 5: The Path

  1. Overview
  2. Build this
  3. Alternate view
  4. Build this
  5. Alternate view
  6. Build these
  7. Assemble
  8. Assemble
  9. Assemble
  10. Assemble

Step 6: The Motor

  1. Overview
  2. Build this
  3. Build this
  4. Assemble
  5. Build this
  6. Assemble
  7. Build these
  8. Assemble
  9. Assemble
  10. Assemble
  11. Assemble
  12. Assemble
  13. Assemble

Step 7: The Corkscrew

  1. Overview
  2. Build this
  3. Alternate view
  4. Build this
  5. Assemble
  6. Assemble
  7. Assemble

Step 8: Finished!

You made it, well done! Please tell me what you think of it down in the comments! Subscribe for more 'ibles like this :) Favorite and share but more importantly, have a great day!

Share

    Recommendations

    • Woodworking Contest

      Woodworking Contest
    • Make it Move Contest

      Make it Move Contest
    • Clocks Contest

      Clocks Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    34 Comments

    My argus failed. My second attempt was okay, but I realised that it just wouldn't work in the end. :/ here's a picture if the internals

    temp_1313856796.jpg

    Not too bad... I am thinking we do a collaboration now, how about you?

    Sounds good :) got another ible I'm working on :) its a gun and its SLOOP GOOD

    Awesome! Do I need to make an account on Knex Flux now? If I have to, I will.

    I would if I was you, its great! I'm on there and I'm addicted to it:) its such a great forum!

    https://youtu.be/F5q93mLa8sk

    This may help :)

    I don't think I could make a shell ejecting one though...... but I will still try.

    It doesn't have to be shell ejecting :) I'm going to have a second attempt. The stock will be hard to make it sturdy.

    Wait! I have an idea, why don't we just do a collaboration on it together! Does it sound good? If so, we should use email, that is all I really have.