The D3 Lego Semi-Automatic Handgun

Step 16 Loading Part 1 (Firing Rubberbands)

The D3 needs 6 firing rubberbands. NOTE: Before loading the rubberbands or ammo, you need to put a lubricant (vaseline) on the firing runway, the sides of the magazine (on the inside of it) , each ammo piece all around it, and on the magazine rod (on the part which will make contact with the ammo and inside of the magazine)

Comments

[roockie44]

i found out that if you put all 6 rubber bands on you need 5 on the trigger as a counter weight so it doesnt go off accidently

[stuntdude47]

What Size rubberbands do you use and where do yo get them

[Trisc5]

where do the rubber bands go at the end?

[Bitterberry9]

you need to pull the rubberbands from the front of the gun, to where the firing gears are, and put it on a gear tooth towards the back of the gear