Step 8: Insert the top cross-brace.

Once you have the bottom cross installed, the top cross should slip on quite easily. Be sure that both top and bottom surfaces are all flush with each other to avoid any instability with the stand.
Thank you for the excellent instructions. I used them as was able to put together my laptop stand.<br><br>I didn't use the print outs - just did the raw measurements on cardboard and cut it out. With every DIY, this one too had trial and error bits but the concepts were quite easy to follow to hack away.<br><br>I think one bit of information that would be helpful is the angles on the edges. I had to wing this to 30 degrees but as you can see, it has made the stand quite steep and I had to knock off 6/8&quot; from the bottom to align it (sort of) with my monitor.<br><br>Thanks again for posting this. Really appreciate it.
<p>I made a tablet stand! It's not exactly the same but I used your instructable as a guide and made a few revisions. Anyways, Thank you!</p>
<p>Nice stand! That looks like a Wacom tablet ... glad you were able to make creative use of it!</p>
Hmmm. I've been needing an iPad 2 stand. Wonder if that will work? Cheap to try it out I guess. Thanks for the instructable!
Any luck on a cheapskate version of an iPad stand? :)
what screensaver?
Sorry for taking so long to reply, my Instructables notifications went AWOL for some reason ... anyway, the screensaver is by Simon Heys and it's called Word Clock - <a href="http://www.simonheys.com/wordclock/" rel="nofollow">http://www.simonheys.com/wordclock/</a>
No problem. Thanks a lit!
Hm. I have made mine and I like it a LOT. I may need to chop it down a little though, as I set my laptop on top of my iHome speakers. I'll post some pics when I'm done.<br>
Messy desk, but you get the point. I actually use my trackpad without issue. It is pretty stable.
Thank you for sharing the photos of the stand in action! :)
Awesome! You saved me :)<br>I will rebuild this using wood.
WOW! Great.. def worth trying in thin plywood... :)
Thank you!<br /> <br /> I made my own stand, based on these templates. I have a bigger laptop, so I made side panels a little smaller, and made cross parts to have some extra crossing between them.<br /> <br /> http://www.flickr.com/photos/akost/4140725725/in/set-72157622892810936/
&nbsp;Hi kost, glad you were able to make use of the templates and nice job on your custom stand -- oh, and thanks for sharing the flickr photos! &nbsp;:)
The one I made is not as cool, but I did mount a fan on it pointing into the intake on the laptop (and made a seal with squishy foam weatherstripping). The fan in the laptop was starting to fail (BIG pain to replace) and it was making noise. Now it never comes on; the external fan keeps things cool. Next time, I'll do it before the fan starts to fail. Nobody puts the fan behind a little removable panel like they should. Those things go bad all the time.
Bummer to hear about your fan troubles, but glad to hear that you were able to figure out a way to cool your laptop! I'm not sure if you've ever seen the way the fans are shoved inside a MacBook, but if they crap out, I'm screwed! :)
good work, tks!
Thanks wanderlima!
Nice work, a good idea, i would use some of my gmjboard(see my ibles to find out more) which is strong enough to probs offer a warrenty! I suggest adding some printable templates? (if thats not alot of work) no doubt more people would make it then.
I was thinking of creating some printable templates but wasn't sure what the best way to put them together was? I'm assuming it's not as difficult as I'm making it out to be and I can just use Photoshop, Illustrator, or MS Visio, but my only concern is making sure that the template prints out true to size on everyone's printer. Good idea, I'll have to look into this for sure. :)
Well, its easy enough, most people will use .pdf files here, so in illustrator just choose pdf under the save menu. So essentially make it to fit A4/Letter, but have it so people have to stick a few sheets together. Put a little note telling people to make sure they have it printing at 100%, and it should all work smoothly. then people can make them out of wood, or perpex, what ever!
Hey <strong>gmjhowe</strong>, that sounds perfect, thanks again for the suggestions and help!<br/>
Nice ible. Great idea. Templates would be great. Thanks for sharing.
Thanks <strong>uguy</strong>! I have a buddy who works in the design world that I've pinged about creating a template so look for one soon. :)<br/>

About This Instructable


59 favorites


Bio: I'm an instructables n00b! :)
More by since76: The DIY Cheapskate Laptop Stand via TheClosetEntrepreneur.com
Add instructable to: