With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Have you been to those other DIY Projector guides and wishing that you could make one, but you don't have the resources, such as a overhead projector?...
Basically the idea behind it is, you make a overhead projector as a backlight then magnify the monitor picture. So here is the resources: 2x Boxes, ...
So to start you want to get the monitor opened up and ready, so take your screwdriver and start opening the monitor, if there is any speakers in it yo...
After you have dettached the mon get the light and place it in the box facing up, make a little incision in the box and pass the cable through it its ...
after placing the light take your monitor front plate and place it over your box top, then place the glass object and the motherboard with the mount o...
get your second box and place your mirror on a 45 degree angle in the top of the box. after this put a hole in the box on the side that the mirror is ...
if you don't get a good picture then take the magnifier and move it to and from the hold back and forth, after this find the perfect spot. then attach...
after you have a good picture your gonna notice that it will get hot so its time to attach the fan. cut a hole in the bottom of the box and put the fa...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »