Print PDF
Favorite
Email
Step 7Cut and Install the Lattice
Even though I got quite a bit of lattice strips when I milled the other parts, it just wasn't enough. So I milled some more at .25".
I measured out my lattice work and cut any new pieces to size that I needed. Then I stained them.
Next I installed the strips on to the outside of the "Retreat" and a lattice work began to form.
Using the nail gun I placed the horizontal lattice strips first. I did this so I could put the vertical pieces on the corners of the retreat. I hoped it gave it a more professional look.
Adding the lattice work provided a more rigid structure.
You are finished, that is it for the construction of the "Doggy Retreat" congratulations!
Now let's put it in its new home. On to the final step.
I measured out my lattice work and cut any new pieces to size that I needed. Then I stained them.
Next I installed the strips on to the outside of the "Retreat" and a lattice work began to form.
Using the nail gun I placed the horizontal lattice strips first. I did this so I could put the vertical pieces on the corners of the retreat. I hoped it gave it a more professional look.
Adding the lattice work provided a more rigid structure.
You are finished, that is it for the construction of the "Doggy Retreat" congratulations!
Now let's put it in its new home. On to the final step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
