Print PDF
Favorite
Email
Step 3Box Prep
To prepare the box for use you will need to do the following:
1). Use a screwdriver to pop one of the small holes on the top and one on the bottom out.
2). Use the pliers to bend the small round cover until it breaks off.
3). Install the cable entry clamps into the holes. Orient them so the screws face sideways compared to the box (as seen in the pictures)
4). Build all of the boxes the same way.
1). Use a screwdriver to pop one of the small holes on the top and one on the bottom out.
2). Use the pliers to bend the small round cover until it breaks off.
3). Install the cable entry clamps into the holes. Orient them so the screws face sideways compared to the box (as seen in the pictures)
4). Build all of the boxes the same way.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
