Print PDF
Favorite
Email
Step 7Last box
Now we build the last box in the series. I then build the intermediate boxes.
1). Insert a 2 foot jumper wire through the "top" cable clamp of the box, then tighten the clamp evenly.
2). Insert the receptacle end of the cable through the "bottom" cable clamp of the box, then tighten the clamp evenly.
3). Attach the cables to the outlets as you did for the previous box, including the ground wires.
4). Install the outlets on the box cover.
5). Install the box cover onto the box. NOTE: depending on where and how you plan to mount the box, it might be worth not fully installing the box cover yet.
1). Insert a 2 foot jumper wire through the "top" cable clamp of the box, then tighten the clamp evenly.
2). Insert the receptacle end of the cable through the "bottom" cable clamp of the box, then tighten the clamp evenly.
3). Attach the cables to the outlets as you did for the previous box, including the ground wires.
4). Install the outlets on the box cover.
5). Install the box cover onto the box. NOTE: depending on where and how you plan to mount the box, it might be worth not fully installing the box cover yet.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
