Print PDF
Favorite
Email
Step 5Make Floorboard
Take the craft boards, and cut one so that it is a bit shorter than the distance between the zip ties at each end of your wheel frames. Line it up between the rails and mark spots to drill holes in the board.
Use zip-ties through these holes to fasten it to the bottom of the frame rails on front and back of both sides. This is the basic cart. It should sit level, if not, adjust the wheels for a good balance.
Use zip-ties through these holes to fasten it to the bottom of the frame rails on front and back of both sides. This is the basic cart. It should sit level, if not, adjust the wheels for a good balance.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
