Print PDF
Favorite
Email
Step 7Add the straps and padding
We were able to use the strap that is part of the shin guard for one of the ones we needed.
I attached 2 strips of the "rough" part of the Velcro to each side of the "head" end of the cradle. You may need to do this differently depending on your animal.
I used one fairly short strip of the "soft" part of the Velcro to go over Merlin, just behind his front shoulders.
This helps him stay in the cradle. Be sure not to get it too tight. You may have to add a "chest strap" or even find a way to use a store-bought harness instead.
We used a bandanna to line the bottom of the cradle due to the nature of our ferrets problem. You may not need this, or may want to line and pad it differently.
I attached 2 strips of the "rough" part of the Velcro to each side of the "head" end of the cradle. You may need to do this differently depending on your animal.
I used one fairly short strip of the "soft" part of the Velcro to go over Merlin, just behind his front shoulders.
This helps him stay in the cradle. Be sure not to get it too tight. You may have to add a "chest strap" or even find a way to use a store-bought harness instead.
We used a bandanna to line the bottom of the cradle due to the nature of our ferrets problem. You may not need this, or may want to line and pad it differently.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
