Introduction: The GGG

Picture of The GGG

The Givadanger Gattling Gun is my first instructable. It Has 16 rounds but there is room for improvement. There is a total of 258 peices in just the clip so make sure you have enough peices. Enjoy!

Step 1: The GGG Clip

Picture of The GGG Clip

This is the part where alot of you will get stuck with not enough peices. I have put all the parts on a list below. Good Luck.

Pic 1: Parts List
Pic 2: Make 2 Of these.
Pic 3: Make 8 Of these.
Pic 4: Another angle of last pic.
Pic 5: Final Product

Step 2: The GGG Gun

Picture of The GGG Gun

This takes just about 193 peices and is easy to make.

Pic 1: Parts List
Pic 2: Front Of Gun
Pic 3: Another angle of front.
Pic 4: Back Motor Compartment
Pics 5-6: Different Angles of Compartment
Pic 7: Finished Product

Step 3: The GGG Firing Bar

Picture of The GGG Firing Bar

This would work better if you put grey spacers all on the green rod to make it move easier.

Pic 1: Firing Bar
Pic 2: Attached to gun
Pic 3: Finished!!

Comments

ProtectTheAlphaWolf (author)2016-07-24

"this is my first instructable"and the last. XD

hendrik s (author)2010-04-08

 lol this gun is wicked though i agree with the bit that says its realy had to load but if you cut a slot (like with arrows) on the back of the yellows it cuts down half the time! 7/10

yingyangcuzins (author)2010-03-16

xck;kdsjfvnijdsnvkjndskjlbfdkjnvjfn........ that was AWOSME







brentbrent (author)2010-03-06

is there a way to make this gun with the other knex motor?

krish98.sai (author)2009-06-08

poopy can uhjyuijhttgt ppppppprrrrrttttttiiiiiiiggp prtig say it

Ikedog1995 (author)2009-05-21

well, i built it, and i think i can say that there is only one problem with this gun. the fact that the rubber bands are on the yellow rods with nothing to hold them on makes it very unstable and very long/hard to load. also, i find it easiest to load it when it is pointing at you, which is not very fun because since the gun is unstable, you can shoot yourself very easily. but still it shoots very smoothly and since the ammo is loaded that way, it shoots alot farther than your standard block trigger. i say 4*s

Ikedog1995 (author)Ikedog19952009-05-21

also, it looks bad a**

chopstx (author)2009-05-06

i like how you put more than one view of every thing. very nice. if i could, 6*. but since i can't, 5*!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

rde (author)2008-01-02

maybe i can moify the mechanics of this gun so it shoots more amo in a very short space of time...

Bright Shadow (author)rde2008-06-20

GEAR RATIOS, my friend

ash1494 (author)2008-04-21

lol too many of these on this site

apples!!!!! (author)ash14942008-06-01

ya, except this one was the first

ImDude (author)2008-05-04

nice and gewd, I'm going to make this into a portable gun.

I_am_Canadian (author)2008-04-24

's a bit winpy.... +1

pls (author)2008-04-11

great design

smidge147 (author)2007-08-24

EVERYONE CHECK OUT MY MG AND SEE WHAT GIVADANGER HAS POSTED ON THERE!

foothead0 (author)smidge1472007-12-10

whats your point his 1 is better

smidge147 (author)foothead02007-12-10

cus givadanger originally posted the pic of his gun on my mg so i wanted people to see it noob!

dsman195276 (author)2007-11-22

so many little green rods.

Neutron06 (author)2007-08-23

voila j'ai fini c nul !

Givadanger (author)Neutron062007-11-03

srry but i dont speak that.

ferrari484 (author)2007-08-23

how far does it hit? but i like your idea

Neutron06 (author)2007-08-23

Nul je me suis fait chier à faire un ta de modification pour qu'il marche

lug big lug (author)2007-08-15

verry verry easy instructions. i like your idea. ime going to make one of those with a shoulder mount and with a long barrel like in starwars battlefront 2's clone commander. i will post when i make it.

mmzdaniel (author)2007-07-05

its nothing new but it looks good and the body looks sturdy, but you should try making it hand held or something... maybe make it shoot more pieces? how? i dont know maybe you try and find out...

thats what im working on for my first instructable hard though to get them to shoot hard

okay...

what lol

you said something and i said okay whats not clear?

lol i thought u were annoyed er something

i dont talk when im annoyed lol...

well i no that now

mcv1000 (author)2007-07-07

this gun is awsome only loading is difficult :(

Knex Rules (author)2007-07-05

HEY EVERYONE, SINCE MY FIRST INSTRUCTABLE SUCKED I DESIGNED A NEW ONE, ITS A HUGE 16 BARREL KNEX MACHINE GUN, PROBABLY NOT AS GOOD AS THIS BUT IT ALWAYS WORKS COMING SOON!!!!!!!!

Darth Trainman (author)2007-07-03

A pretty good upgrade to old Sharpshot's original gatling...

I never copied anyone really... i just found the sight

I didnt say copy... although the barrel looks almost identical... the body is far superior however...

It isn't a copy, but the barrels are alomst the same.

Givadanger (author)2007-07-02

I have just made the gun better by stratling the firing pins on 8 of the bullets. just separate them from the touching ones and it fires nicer

Easy Button (author)2007-07-02

looks ok not the best but ok

very good campact frame

smidge147 (author)2007-07-02

lol uve mixed around sum 1 elses design but still the frame looks cool btw first comment.

About This Instructable

4,450views

13favorites

License:

More by Givadanger:The GGG
Add instructable to: