Introduction: The Gargoyle

Picture of The Gargoyle

So this is Seleziona's newest gun.

A break action pistol(?) that uses the shells from the TR8. It's very cool, if you ask me.

I made it to be just a fun gun. The loading mechanism will have you wanting to reload the gun over and over again. The reason for it is because there is a bolt on the side of the front of the gun that ejects the shell when you pull it back, making for a cool experience.

So the gun isn't the most reliable in the world, or the most powerful. It wasn't meant to blow your mind with power or accuracy, but it was made just to be a fun gun to shoot around in your room.

Sure you've probably seen break action guns that use shells, but I don't think there is any good ones posted. My inspiration for this came from killersafecracker's (unposted) break action gun that uses shells. I remembered seeing his a while ago and remembered what was so cool about it and made my own.

The shell does NOT come out of the gun until you pull back the bolt. Sure you could dig it out with your finger, but where's the fun in that?

So there you guys go. A few have heard about this project before, and after three major barrel remakes the gun is finished.

Stop reading this and build it if you want!

Warning: Gun uses three broken parts! (I think) One normal modified white rod, an orange connector without one tab, and a y connector with just one tab (I think there is one in here...)

Step 1: The Front Barrel Pt. 1

Picture of The Front Barrel Pt. 1

The first step of the gun. This part is made really weird, because it has to house a shell and the bolt mech. Just follow the steps closely. Try not to modify it right here.

Step 2: Front Barrel Pt. 2

Picture of Front Barrel Pt. 2

The front of the part you last made. You make the bolt here and finish up the barrel.

Step 3: Brake!!

Brake!!! Stop the car!!!!
In case you were wondering, the break is missing..

Step 4: Back Body Portion Pt. 1

Picture of Back Body Portion Pt. 1

The part where the handle is! The gun is not functional without this!

Step 5: Back Body Portion Pt. 2

Picture of Back Body Portion Pt. 2

The rest of the body. The gun will be all put together in this part too.

Step 6: Shooting

Picture of Shooting

Here you find out how to shoot the gun that you have built.


Hope you have fun with my gun!

Comments

megustatrains (author)2013-06-02

It is a fun gun to use. It is plain

darkguy159 (author)2013-02-10

cool. favorited.

hazzybarton123 (author)2012-04-21

parts list plz

Inventor X (author)2012-02-08

I like this. Good job. :DDD

PotatoCoffee (author)2011-12-30

Good one!

shieldsam (author)2011-12-20

just finished it. do you want a picture?

Seleziona (author)shieldsam2011-12-21

Sure!

H1T4TCH1 (author)2011-12-08

Hm, it's innovative so I like it!

Seleziona (author)H1T4TCH12011-12-10

Thank you!

Puddock (author)2011-12-07

I like the name! And the gun of course.

altair ibn la ahad (author)2011-11-09

love it
good work man

thank you

selez, if u have mw2 is it xbox and also u should Make an Intervention... xD

I don't have mw2, and I have a ps3.
But I might make an intervention

your welcome

didexo (author)2011-11-16

thanks I love it I will build if i get some time

MegaMetal8 (author)2011-11-09

Awesomeee. I Will make this when i finish the Racker Rifle.

Seleziona (author)MegaMetal82011-11-10

Ok cool :)

MegaMetal8 (author)Seleziona2011-11-10

Have you got MW3 yet?

dr. richtofen (author)2011-11-09

looks cool!

Seleziona (author)dr. richtofen2011-11-10

Thank you

dr. richtofen (author)Seleziona2011-11-10

np

beanieostrich (author)2011-11-09

I like it. =D

Seleziona (author)beanieostrich2011-11-10

Me too :D lol, thanks.

beanieostrich (author)Seleziona2011-11-10

No problem. =) Its just cool how the "pump" ejects the TR shell. I would see this being a shotgun with the right shell design.

~KGB~ (author)2011-11-09

Looks great!

Seleziona (author)~KGB~2011-11-10

Thanks man!

~KGB~ (author)Seleziona2011-11-10

No prob! =D

Football viking boy (author)2011-11-09

nice!!!

The Nomlack (author)2011-11-09

Awesome! Might make it soon.

Seleziona (author)The Nomlack2011-11-10

Cool!

AUG-5OM3 (author)2011-11-09

Cool, but the front bit looks a little messy. =S

Seleziona (author)AUG-5OM32011-11-10

Yeah :/ couldn't really help that. The front barrel has you house the shell and the bolt and on the back of the gun, there is only one connector on one side of the pin, and four on the other side, making it and odd offset pin.

Seleziona (author)2011-11-10

Thanks!!

Raz1r Knex Bull3t (author)2011-11-09

This looks like a fun gun. : )

And it is!

TheRacker (author)2011-11-10

Looks very large, if you ask me!

Seleziona (author)TheRacker2011-11-10

I couldn't make it much smaller even if I wanted to. The bolt mech takes up a lot of space on and in the gun.

About This Instructable

1,724views

9favorites

License:

Bio: My name is Daniel, I am a computer engineering student. Cooking and baking are my passion, sharing the knowledge that absolutely anyone can cook outstanding ... More »
More by Seleziona:King of BrowniesThe Alpha MaleThe Gargoyle
Add instructable to: