Print PDF
Favorite
Email
Step 6Paint
Now a final coat of ultra flat black paint and we're done. I used ultra flat black to match the original paint on the helmet, the black Shoe Goo, black solar panel, and black case. This way cratches won't be visible. You could use any color though, if you put a few coats on.
1. Buff, bondo, Shoe Goo, very carefully sand, any bumps or blemishes.
2. Detach panel and case.
3. Tape up Velcro to cover
4. Take off O ring lenses and wrap LEDs in tape, or take out LEDs and cover holds they go into.
5. Wash with rough sponge, rinse, dry
6. Spray paint. Let dry a full night.
Ride!
1. Buff, bondo, Shoe Goo, very carefully sand, any bumps or blemishes.
2. Detach panel and case.
3. Tape up Velcro to cover
4. Take off O ring lenses and wrap LEDs in tape, or take out LEDs and cover holds they go into.
5. Wash with rough sponge, rinse, dry
6. Spray paint. Let dry a full night.
Ride!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
