Here are the Learning Objectives:
-The student will learn to Measure and Layout a design than apply that knowledge in a practical and fun project.
-The student shall demonstrate the safe use and setup of a drill press.
-The student learn the effective use of sandpaper with wood.
-The student will use creative design and problem solving to build a unique design with wood.
-Wood Blank approx 3" by 3" by 5"
-Assorted pieces of 1/8", 3/8", 1/2" plywood or solid wood.
-1 piece of 1" dowel... about 4" long.
-Assorted dowel pieces... 1/2" diameter works well.
-1 Canning Jar. 500ml is best.
-1" Forstner drill bit. (i have 3 set up on 3 different drill presses.)
-1/2" Forstner drill bit (for attaching leg dowels)
-3/4" Forstner drill bit (for drilling hole in gumball dispenser)
-Assorted clamps (Jorgensen's work really well)
-Sandpaper 120G, 180G
-Band saw or scroll saw
Submitted by HD Stafford Middle School for the Instructables Sponsorship Program
Step 1: Cut out the Blank
Set up the Bandsaw with a sliding fence and a clamp. Show the kids how to mark off 5" and cut. Encourage the students to take their time and cut slowly so the cut will be straight. You can use any saw you want to but i find the band saw works well. I use the "5 rule" which is:
-Keep guard 5mm above workpiece
-Keep fingers 5cm away from blade
-Keep all 5 of the digits on each hand.