With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
You can buy a replica of the Good Samaritan from the Hellboy movies but there's no way to import anything even remotely gun shaped into Australia. This is ...
First task was to find as many pix from as many different angles as possible and draw a set of top/side/front and rear views in 1:1 scale. Tools ...
mark out a circle in foam panel as the base of the cylinder. It's possible to use stiff cardboard or a hacked up soda bottle. The alumium tube ...
You can see where the lower section of the gun has been joined to the barrel.A strip of metal with a piece of tube is glued in place ...
The underside and rear of the gun are formed by protecting the attached trigger/hammer with plasticine and foam. The rule of thumb is that larger solid pieces (barrel, ...
A few screws countersunk into the appropriate areas of the gun add to the authenticity. The butt is formed by molding air drying clay. A spray with black ...
When I make another one i will mock it up in clay/aluminium etc and cast it, probably in resin. Not thrilled with the finish on some parts and ...
PDF file with some clarification of steps involved and some basic blueprints. All scales are in inches on the plans 1:1
hell boy: the good samaritan gunby caleb's tutorials
My DIY Hellboy Costumeby rossiizz
Making the Big Baby from Hell Boyby laurent123
DIY Hellboy Costumeby Glomgrey
Hellboy's - Illuminating Right Hand of Doom (RHOD)by blanthegenius
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »