Hello again!
Here it is, the Knex L96A1 Version 1.00 !
This version is not so different from version 0.90 , I just changed some things in the body of the sniper to make it work better. So that is why you probably won't see any diffrencies from version 0.90
Pro's and Con's
Pro's:
Looks reallistic
Shoots really far for a gun with a ram
According to me the size is about the same like the real gun
Sturdy
Won't jam easy
Awesome scope
Comfy
Additional Attachments are made with ease thanks to the handy Tactical rail
Removeable mag
Good Ammo
Nice Accuracy
Range with good rubber bands is over 20 Meters, so more than 60 Feet!
Con's:
11 modded pieces (!) of wich 9 are needed so the gun will work
Ammo can break
OK done with that,
Now some new stuff to this instructable
READ THIS! IT IS IMPORTANT FOR YOU IF YOU ARE GOING TO BUILD THIS!
This ible will be different from my others, because here I work with modules (seperate parts)
So here is how it works:
You first go to the "Editions" step (step 16) to choose wich version you are going to make
In that step there will be a list of wich modules you need to build for that specific version
Then you go to the steps of the modules you need and build them
Then you head for the Assembly step for your Version (As Example: step 20 : Sniper Version assembly)
There you will assemble your version and you are done =D
GOOD LUCK!
Here it is, the Knex L96A1 Version 1.00 !
This version is not so different from version 0.90 , I just changed some things in the body of the sniper to make it work better. So that is why you probably won't see any diffrencies from version 0.90
Pro's and Con's
Pro's:
Looks reallistic
Shoots really far for a gun with a ram
According to me the size is about the same like the real gun
Sturdy
Won't jam easy
Awesome scope
Comfy
Additional Attachments are made with ease thanks to the handy Tactical rail
Removeable mag
Good Ammo
Nice Accuracy
Range with good rubber bands is over 20 Meters, so more than 60 Feet!
Con's:
11 modded pieces (!) of wich 9 are needed so the gun will work
Ammo can break
OK done with that,
Now some new stuff to this instructable
READ THIS! IT IS IMPORTANT FOR YOU IF YOU ARE GOING TO BUILD THIS!
This ible will be different from my others, because here I work with modules (seperate parts)
So here is how it works:
You first go to the "Editions" step (step 16) to choose wich version you are going to make
In that step there will be a list of wich modules you need to build for that specific version
Then you go to the steps of the modules you need and build them
Then you head for the Assembly step for your Version (As Example: step 20 : Sniper Version assembly)
There you will assemble your version and you are done =D
GOOD LUCK!
Remove these ads by
Signing UpStep 1: Handle Module
Time for the handle! you will need this module for every version too
-pieces:
CONS
dark gray: 10
red: 6
green: 6
orange: 11
yellow: 20
white: 16
RODS
green: 43
white: 20
blue: 10
SPECIAL
Y-clip: 3
Bendy yellow rod: 3
-Instructions :
1: what we are making
2: make
3: collect
4: make
5: make TWICE
6: make all this TWICE
7: make that too
8: now add the blue rods on a plate with the yellow cons on the upper side
9: now add that thing
10: add all that stuff
11: put that special plate on (from pic 7)
12: put more of that stuff on
13: add the last plate
14: grab that thing
15: remove the orange cons (BTW you can replace the orange cons with dark dray ones, the piece count is counted to that as well)
16: slide it in
17: put these back
18: now add some dark gray cons
DONE
-pieces:
CONS
dark gray: 10
red: 6
green: 6
orange: 11
yellow: 20
white: 16
RODS
green: 43
white: 20
blue: 10
SPECIAL
Y-clip: 3
Bendy yellow rod: 3
-Instructions :
1: what we are making
2: make
3: collect
4: make
5: make TWICE
6: make all this TWICE
7: make that too
8: now add the blue rods on a plate with the yellow cons on the upper side
9: now add that thing
10: add all that stuff
11: put that special plate on (from pic 7)
12: put more of that stuff on
13: add the last plate
14: grab that thing
15: remove the orange cons (BTW you can replace the orange cons with dark dray ones, the piece count is counted to that as well)
16: slide it in
17: put these back
18: now add some dark gray cons
DONE
Visit Our Store »
Go Pro Today »
long time no post from me, that's because I'm struggling a bit with school lately.
soon i have my mid year exams and after that, then I think i will have time to post the 1.10 version of this gun.
sorry for my lack of posts and comments :S
I hope you guys understand
lol nice gun 5*
the rest is just coincidence and there are just a few knex gun design ideas or frameworks or whatever that just work well and those are commonly used.
My vacation will arrive soon (YAY!) and I will have time for some projects again!
ofcourse, I will be going on vacation to Portugal, but after that I have about 4 weeks of time
My question to all you guys: Think of some guns for me to make :D
so far I have a few projects:
A secret by me only crossbow kinda rifle (no more details)
a Barret 50 cal (Idea By Fred The Evil Puppet)
and maybe a project together with lemonpickle (no gun or any idea yet to make)
So if you guys come up with some nice idea's I may be making them in the vacation!
this is the best L96A1 on this site.
=D
BTW this IS my best gun ever :D
Gratz
Awesoem gun btw