The Litter Kit

Step 6 Deploy.

To deploy your kit, you simply go in reverse of storage.
Step 1
Take off the end cap without the spike.
Step 2
Remove the plastic bag.
Step 3
Dump out the eye-bolts, and extra spike. Put the extra spike in your pocket, in case you damage the first one.
Step 4
Take off the second end cap with the spike screwed in it.
Step 5
Unscrew the spike from the inside of the cap, and screw it in from the outside.
Step 6
Screw the end cap with the spike in it back onto the pipe.
Step 7
Place on stick, or staff.
Step 8
Screw in eye-bolts until kit is tight.
Step 9
Use the handle of the plastic bag to tie it to your belt loop.
Step 10
Pick up garbage, and put it into your bag.