Print PDF
Favorite
Email
Step 4Installing & Configuring the Software
The Magic Mirror software can be downloaded from diymagicmirror.com/install.html .
After installed, you set the Sensor Hub port which will be the Arduino COM port on Windows (COM3 = 5333, COM4 =5334...) or if on Mac or Linux, will always be 5333.
You then turn on which sensors you have wired up and configure other options diymagicmirror.com/images/configuration.jpg
A complete set of instructions on how to setup and configure the software is found in the manual diymagicmirror.com/files/wiring_and_software_operations.pdf
After installed, you set the Sensor Hub port which will be the Arduino COM port on Windows (COM3 = 5333, COM4 =5334...) or if on Mac or Linux, will always be 5333.
You then turn on which sensors you have wired up and configure other options diymagicmirror.com/images/configuration.jpg
A complete set of instructions on how to setup and configure the software is found in the manual diymagicmirror.com/files/wiring_and_software_operations.pdf
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
