Print PDF
Favorite
Email
Step 4Making the Melting Chamber
Now that you've cut off the funnel piece, start on the melting chamber.
Once again, follow the Alibre Design Express file that's included.
For this piece, you're going to want to start with its outside (carving out 1/8" from it's diameter), and then go to its inside and carve out the entire melting cavity.
You will finish the other half of the melter (the 1/4" groove that will fit around the heating element) after you remove the large stock from the chuck (after you're done with the baseplate).
Once again, follow the Alibre Design Express file that's included.
For this piece, you're going to want to start with its outside (carving out 1/8" from it's diameter), and then go to its inside and carve out the entire melting cavity.
You will finish the other half of the melter (the 1/4" groove that will fit around the heating element) after you remove the large stock from the chuck (after you're done with the baseplate).
melter.AD_PRT241 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
