Print PDF
Favorite
Email
Step 5Solder things.
Cut Two lengths of wire.
One only has to reach from your front wheel to your handle bar.
The other has to reach from the front wheel to the back rack (or water cage bottle,depending on where you will put your battery.)
Punch two holes in the back of the tin and push a wire though each.
Strip the ends of the wire.
Solder one wire to one terminal and one wire to the other terminal.
One only has to reach from your front wheel to your handle bar.
The other has to reach from the front wheel to the back rack (or water cage bottle,depending on where you will put your battery.)
Punch two holes in the back of the tin and push a wire though each.
Strip the ends of the wire.
Solder one wire to one terminal and one wire to the other terminal.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
