Print PDF
Favorite
Email
Step 6Add the bulb.
Pull the wires back through and sit the bulb nicely in the opening of the tin.
Punch a small hole in each corner, almost under the rim of the bulb.
Screw a self tapper, with a washer on it, into each hole.
Do this gently going from screw to screw until the bulb is tight.
It is made of glass so don't go crazy but it must be secure.
Punch a small hole in each corner, almost under the rim of the bulb.
Screw a self tapper, with a washer on it, into each hole.
Do this gently going from screw to screw until the bulb is tight.
It is made of glass so don't go crazy but it must be secure.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
