Print PDF
Favorite
Email
Step 8Add the switch.
A push-to-go switch would look great but I prefer to use what I have to hand; which is a peg and some drawing pins.
Wrap the end of the short wire around the pin and push it into the inner bottom surface of the peg.
Take a new wire from your rack to your handlebar and pin it to the upper inner surface of the peg.
Cable tie the peg to the handlebar securely.
Wrap the end of the short wire around the pin and push it into the inner bottom surface of the peg.
Take a new wire from your rack to your handlebar and pin it to the upper inner surface of the peg.
Cable tie the peg to the handlebar securely.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
