Print PDF
Favorite
Email
This is a pretty much universal electronics stand I made from unwanted materials around my house. I am always listening to, using or charging my gadgets but I never have a safe place to put them while I'm doing this.
I'm quite new to Instructables, this is my first and I currently do not have a very good camera but I hope you will enjoy making this.
I'm quite new to Instructables, this is my first and I currently do not have a very good camera but I hope you will enjoy making this.
Remove these ads by
Signing UpStep 1What you will need
a Paper cup, although two would be better as your likely to make a few mistakes,
I used a medium McDonalds cup which probably is a small US McDonalds cup but any cup will do.
A Pair of sharp scissors
A permanent marker for marking out the lines to cut through
Spray-Paint ( I chose silver-metallic paint) or if you already have a coloured cup this wont be necessary
Paper to cover the spray-painting area
I used a medium McDonalds cup which probably is a small US McDonalds cup but any cup will do.
A Pair of sharp scissors
A permanent marker for marking out the lines to cut through
Spray-Paint ( I chose silver-metallic paint) or if you already have a coloured cup this wont be necessary
Paper to cover the spray-painting area
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
