This is a custom built cubicle to organize a lot of tools, supplies, and an electronics workbench/ lab area. I had to live away from home for ten months (in a little, tiny, cheap, studio appartment) due to job requirements. I took a lot of my (hobby) tools and supplies with me and quickly got tired of hunting through boxes stacked on top of boxes (see Before picture).
I first priced some large heavy duty shelving units at the local big box store and it ran into several hundred dollars. I decided I could do better than that and have a nice cubicle customized to my needs. I will admit this idea was sparked many years ago when I first saw some custom cubicles in a book, Nomadic Furniture, but mine goes a bit beyond those designs.
This cubicle is built of about 30 2x2s for framing, 1x10s for shelving, hardware consists of 1/4 inch nuts, bolts, and lock and fender washers. A few deck screws secure the shelves. I wasn't sure the 2x2s were going to be strong enough, but with the intermediate supports in the middle of each side, its plenty strong. I had the red paint and some of the wood, and the desk its built around, but I think the whole thing could be done for around $100 max. Far cheaper than equivalent amount of store bought shelves!
Two sides are against walls, and two sides are open beyond the cube, which helps keep me from getting claustrophobic. But, that's not a problem for me - I love this space!
My finished size came out to about 7 x 7 x 7 foot cube. I first envisioned a cube within a cube with the space between them filled with shelves. But, as the design developed, it ended up being constructed as a series of "ladders" going around the area - you can see this in the build sequence pictures. Notice I had to stagger the level of shelves from one side to the adjoining sides.
UPDATE: SIZE MATTERS!!
I have since moved back home, and had to re-size my cubicle. It is now about 5.5 x 6 foot - I'm still getting used to it... My feeling is this is a bit too small to be comfortable, but maybe that's because I had it bigger for so long.
I have a workshop in a basement room, but my wife let me put the cubicle up between the living room and kitchen - albeit, a smaller version. It's a compromise for both of us. This way, I don't disappear for hours at a time; I'm in my cubicle, and she's watching Pride & Prejudice, and we coexist happily! (There's a little bargaining power there for those whose spouse may not be keen on having a Mancave... or, cubicle, in the middle of the house!)
If you enjoyed this, please cast a vote! Thanks!
I first priced some large heavy duty shelving units at the local big box store and it ran into several hundred dollars. I decided I could do better than that and have a nice cubicle customized to my needs. I will admit this idea was sparked many years ago when I first saw some custom cubicles in a book, Nomadic Furniture, but mine goes a bit beyond those designs.
This cubicle is built of about 30 2x2s for framing, 1x10s for shelving, hardware consists of 1/4 inch nuts, bolts, and lock and fender washers. A few deck screws secure the shelves. I wasn't sure the 2x2s were going to be strong enough, but with the intermediate supports in the middle of each side, its plenty strong. I had the red paint and some of the wood, and the desk its built around, but I think the whole thing could be done for around $100 max. Far cheaper than equivalent amount of store bought shelves!
Two sides are against walls, and two sides are open beyond the cube, which helps keep me from getting claustrophobic. But, that's not a problem for me - I love this space!
My finished size came out to about 7 x 7 x 7 foot cube. I first envisioned a cube within a cube with the space between them filled with shelves. But, as the design developed, it ended up being constructed as a series of "ladders" going around the area - you can see this in the build sequence pictures. Notice I had to stagger the level of shelves from one side to the adjoining sides.
UPDATE: SIZE MATTERS!!
I have since moved back home, and had to re-size my cubicle. It is now about 5.5 x 6 foot - I'm still getting used to it... My feeling is this is a bit too small to be comfortable, but maybe that's because I had it bigger for so long.
I have a workshop in a basement room, but my wife let me put the cubicle up between the living room and kitchen - albeit, a smaller version. It's a compromise for both of us. This way, I don't disappear for hours at a time; I'm in my cubicle, and she's watching Pride & Prejudice, and we coexist happily! (There's a little bargaining power there for those whose spouse may not be keen on having a Mancave... or, cubicle, in the middle of the house!)
If you enjoyed this, please cast a vote! Thanks!
Visit Our Store »
Go Pro Today »
"1970s Instructables..." - that's good!
Thanks for commenting..
Ken Issacs is the architect who designed all kinds of grid beam apartment cubes in the '70's. His book (free to read and download online) gives detailed instructions on how to build the grid beams so they will bolt together evenly. Im going to build a cube inside a minivan to bolt (folding) camping furniture to that is easy to move and remove, reconfigure instead of drilling into the van.I'm going to paint mine now!
I like the system a lot. Nice work. I have also heard of the Nomadic Furniture book, and would love to own a copy - maybe a reprint should be considered by some forward-thinking publisher.
Are you familiar with "grid beam" construction? I have the book on how to build with it, and it's something I have been chomping at the bit to do for years! I am concerned, though, about the potential for racking in your system. I believe you said your cube was strong and stable, but maybe some triangulation or panels would keep it from shifting over time..? I can't say, as I am no expert, and if your cube is sturdy, then disregard my clabber..! lol again, great and inspirational job!
Keep up the good work.
5/5* and following.
But the cubicle is nice when I'm working my small electronic projects.
Thanks, Attmos, for your comments.
Have fun.
Hey! Nice job on the Maverick Rev6! I'd like to try one of these and hang it in my pickup back window gun rack - but that might be just asking for a busted window or shake down by the local police!
Thanks...
Thanks for showing it to us.
Hey, since the Hostess Twinkie factory shut down... any chance you could come up with a twinkie clone? (I haven't had one in tenty years but now I crave one!!)