Print PDF
Favorite
Email
Step 2Extract a piece of copper wire from scrap Romex
If you're starting from a scrap of Romex cable (the kind they use to wire outlets and lights in buildings), you'll need to extract a piece of the copper wire from inside it.
Starting with a piece no longer than about 12", cut a small part of the insulation at one end. Straighten the cable then use the needle-nosed pliers to grab the wire you want and pull it out.
Starting with a piece no longer than about 12", cut a small part of the insulation at one end. Straighten the cable then use the needle-nosed pliers to grab the wire you want and pull it out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
