With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
There's the Poong Stick. There are helicopters. Somehow, the PoongCopter was inevitable...
The requirements are minimal - two popsicle or craft sticks, and something to work them. My Leatherman has a nice file, or you could use a rotary to...
Start by making a short Poong Stick (see the original Instructable). The exact length is not important, but you need to add two slots half way down t...
Cut or snap the other popsicle stick in half, and cut a slot in each cut end. Again, the slots should be quite wide, but this time they should be sl...
Slot it all together! Overlapping the ends of the wings should provide enough friction to stop things flying apart. The trick is to make sure you g...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Remove these ads by
Visit Our Store »
Go Pro Today »
Spin it like a top, and it just sort of spins through the air - not high.
(You ought to be aware of Canida - she's Eric's other half.)
Canida = Mrs Ewilhelm.
Check the "about" page for a round-up of the staff. If you hover over the images, you can see their user-name.
...or was that some subtle joke I missed?
If you want to avoid needing glue, start with a narrow slot and gradually widen it until everything fits.