Introduction: The Pro-racer Paper Airplane

Picture of The Pro-racer Paper Airplane

You will need a piece of paper, some tape, and a pencil. With this I will show you how to make the pro-racer.

Step 1:

Picture of

Fold paper in half and then unfold.

Step 2:

Picture of

Now using the reference mark you just made, divide the paper in fourths.

Step 3:

Picture of

Use the outside reference folds to fold down the two top corners.

Step 4:

Picture of

Fold the top edges over to the center.

Step 5:

Picture of

Fold down the top edge to 4 inches above the bottom edge.

Step 6:

Picture of

Fold the top edges to the middle.

Step 7:

Picture of

Fold up the flap under the wings.

Step 8:

Picture of

Flip over the plane and fold it in half.

Step 9:

Picture of

Fold wings to the side of the paper airplane.

Step 10:

Picture of

Write the name on the right wing.

Step 11:

Picture of

Fold the back two corners and unfold. This gives the plane stability.

Step 12: Finished

Picture of Finished

This is what your plane should look like.g


OrigamiAirEnforcer (author)2013-05-13

You might want to make the intro step's photograph that of the completed aircraft, rather than its materials.

About This Instructable




More by nate408:Lego iPod/iPhone Charging DockCopper Chain BraceletThe Hammer Head Paper Airplane
Add instructable to: